Double Column Heavy Duty Band Saw Machines Model - DCM 340, 450, 550, 650




Specifications :

MODEL DCM- 340
 Cutting capacity 340mm ø 340 mm
Blade Size 4650 X 34 X 1.1 mm
 Drive Motor 5 HP
 Hydraulic Motor 1.5 HP
Coolant Motor 0.15 HP
Band Tension Hydraulic
Machine Weights 2800 Kg.
Overall Size L x W x H 2050 x 1950 x 1750




Vertical saw Head :

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.


Saw Feed :

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.


Clamping :

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.


Accuracy :

Taper 0.1 mm for 100 mm.


Band wheels :

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.


Standard Equipments :

• Complete electrical equipment with panel board, limit switch & electric motors
• Complete hydraulic system with Yuken make DC valve.
• Coolant System with pump and piping.
• Power driven chip brush for easy chip removal from blade.
• One M42 grade bimetal blade.
• Operation tools & spanners.


Band Wheels :

• Chip Brushes
• Roller table 1500 mm
• Bimetal Band saw blade
• Variable vice pressure
• Variable frequency Drive.




Double Column Heavy Duty Band Saw Machines Model - DCM 421




Specifications :

MODEL DCM- 421
 Cutting capacity 421mm ø 421 mm
Blade Size 5300 X 41 X 1.3 mm
 Drive Motor 7.5 HP
 Hydraulic Motor 1.5 HP
Coolant Motor 0.15 HP
Band Tension Hydraulic
Machine Weights 3500 Kg.
Overall Size L x W x H 2200 x 1900 x 1550




Vertical saw Head :

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.


Saw Feed :

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.


Clamping :

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.


Accuracy :

Taper 0.1 mm for 100 mm.


Band wheels :

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.


Standard Equipments :

• Complete electrical equipment with panel board, limit switch & electric motors
• Complete hydraulic system with Yuken make DC valve.
• Coolant System with pump and piping.
• Power driven chip brush for easy chip removal from blade.
• One M42 grade bimetal blade.
• Operation tools & spanners.


Band Wheels :

• Chip Brushes
• Roller table 1500 mm
• Bimetal Band saw blade
• Variable vice pressure
• Variable frequency Drive.




Double Column Heavy Duty Band Saw Machines Model - DCM 550





Specifications :

MODEL DCM- 550
 Cutting capacity 550 mm ø 550 mm
Blade Size 6270 X 41 X 1.3 mm
 Drive Motor 7.5 HP
 Hydraulic Motor 2 HP
Coolant Motor 0.2 HP
Band Tension Hydraulic
Machine Weights 3800 Kg.
Overall Size L x W x H 3500 x 1950 x 2650




Vertical saw Head :

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.


Saw Feed :

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.


Clamping :

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.


Accuracy :

Taper 0.1 mm for 100 mm.


Band wheels :

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.


Standard Equipments :

• Complete electrical equipment with panel board, limit switch & electric motors
• Complete hydraulic system with Yuken make DC valve.
• Coolant System with pump and piping.
• Power driven chip brush for easy chip removal from blade.
• One M42 grade bimetal blade.
• Operation tools & spanners.


Band Wheels :

• Chip Brushes
• Roller table 1500 mm
• Bimetal Band saw blade
• Variable vice pressure
• Variable frequency Drive.




Double Column Heavy Duty Band Saw Machines Model - DCM 650




Specifications :

MODEL DCM- 650
 Cutting capacity 650 mm ø 650 mm
Blade Size 7600 X 45 X 1.6 mm
 Drive Motor 10 HP
 Hydraulic Motor 2 HP
Coolant Motor 0.2 HP
Band Tension Hydraulic
Machine Weights 4500 Kg.
Overall Size L x W x H 3700 x 1950 x 2750




Vertical saw Head :

Vartical Saw Head is Supported by two Rigid Induction hardned & Hard Chrome plated & ground columns. Blade tensioning is done by Manual / Hydraulically operated cylinders. Auto Hight sensor optimizes ideal position of blade with least down time.


Saw Feed :

Vartical Saw Head up down motion is controlled by two Hydraulic cylinders. Feed for various material is regulated by temperature & pressure compensated flow control valve. FFC valve is provied to control the cutting pressure required for various types of materials & different tensile strength & BHN.


Clamping :

Clamping of job is done by hydraulically operated vice Jaws. Fixed vice jaws are perpendicular to the blade. The moving vice clamps the job with sufficient work pressure. For tube cutting variable vice pressure will be provied as optional accessories.


Accuracy :

Taper 0.1 mm for 100 mm.


Band wheels :

Drive & Driven band wheels with optimum centre distance gives smooth blade twisting force which results in excllent performance of blade.


Standard Equipments :

• Complete electrical equipment with panel board, limit switch & electric motors
• Complete hydraulic system with Yuken make DC valve.
• Coolant System with pump and piping.
• Power driven chip brush for easy chip removal from blade.
• One M42 grade bimetal blade.
• Operation tools & spanners.


Band Wheels :

• Chip Brushes
• Roller table 1500 mm
• Bimetal Band saw blade
• Variable vice pressure
• Variable frequency Drive.